Heat Management

A few facts to consider when modifying internal combustion engines are:

• Horsepower & Torque at their most fundamental origins are measurements of heat and pressure. As power levels increase, so does it's inherent by-product; heat. 
• As intensity and frequency of exposure to exhaust system components increase, the failure rate of critical engine components also rises considerably. Hoses, wiring harnesses, and brake lines just to mention a few will disintegrate if heat management is not taken into consideration.

We at TurboSource hold Heat Management in very high regard. 700 series Inconel is used in the manufacturing of these heat shields not just to outlast their application, but to provide greatest thermal barrier possible. These shields are good to 3000 degree F, and are also manufactured with a pre-engineered air gap to keep from over saturating the application. Inconel when heated produces a natural oxidation barrier, which regular sheet metal shields, turbo blankets, heat wrap, and coatings lack. This oxidation barrier combined with a clam-shell design of an inner layer of silica insulation produces the ultimate in heat management!

More technical specs: 

Heatproof temperature = 2800 DEGREE F MAX

・Thermal conductivity = CAN BRING TEMPS TO 300 F MAX COLD FACE

・Hot side vs. cold side temperature = 300 DEGREE F MAX COLD FACE INNER 1200 DEGREE F MAX

　ex.) 700℃(hot side)→60℃(cold side)

This is the custom shield estimate form. Please fill out all of the fields. Please take a picture of your item with a tap measure and include the height, Width, and length of the piece. Including a picture with the runner diameter also helps with ensuring the accuracy of the estimate. 

Most items cost between $599 and $1199 per part. 

Note these are estimates they are subject to change. We strive to provide the best estimate possible but we reserve the right to be able to adjust the estimate once the part is in our hands. 

Custom shielding takes around 10 business days from when we receive the part. Due to the manufacturing process of this shielding we have to stick to this time line. Custom orders are non-refundable, payment is do upfront before the shielding begins.